<?xml version="1.0" encoding="US-ASCII"?>
<!DOCTYPE rfc SYSTEM "rfc2629.dtd" [
<!ENTITY rfc4627 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.4627.xml">
<!ENTITY rfc3986 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.3986.xml">
<!ENTITY rfc2119 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2119.xml">
<!ENTITY rfc4287 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.4287.xml">
<!ENTITY rfc2616 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2616.xml">
<!ENTITY rfc3339 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.3339.xml">
<!ENTITY rfc2045 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2045.xml">
<!ENTITY rfc5226 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.5226.xml">
<!ENTITY rfc2396 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2396.xml">
<!ENTITY iddiscovery SYSTEM "http://xml.resource.org/public/rfc/bibxml3/reference.I-D.hammer-discovery.xml">
<!ENTITY uritemplate SYSTEM "http://xml.resource.org/public/rfc/bibxml3/reference.I-D.gregorio-uritemplate.xml">
<!ENTITY linkheader SYSTEM "http://xml.resource.org/public/rfc/bibxml3/reference.I-D.nottingham-http-link-header.xml">
<!ENTITY html401 SYSTEM "http://xml.resource.org/public/rfc/bibxml4/reference.W3C.REC-html401-19991224.xml">
<!ENTITY css21 SYSTEM "http://xml.resource.org/public/rfc/bibxml4/reference.W3C.CR-CSS21-20070719.xml">
]>
<?rfc toc="yes"?>
<?rfc symrefs="yes"?>
<?rfc compact="yes"?>
<?rfc subcompact="no"?>
<?rfc strict="no"?>
<?rfc rfcedstyle="yes"?>
<rfc category="info" docName="draft-zyp-json-schema-03" ipr="trust200902">
	<front>
		<title abbrev="JSON Schema Media Type">A JSON Media Type for Describing the Structure and Meaning of JSON Documents</title>

		<author fullname="Kris Zyp" initials="K" role="editor" surname="Zyp">
			<organization>SitePen (USA)</organization>
			<address>
				<postal>
					<street>530 Lytton Avenue</street>
					<city>Palo Alto, CA 94301</city>
					<country>USA</country>
				</postal>
				<phone>+1 650 968 8787</phone>
				<email>kris@sitepen.com</email>
			</address>
		</author>

		<author fullname="Gary Court" initials="G" surname="Court">
			<address>
				<postal>
					<street></street>
					<city>Calgary, AB</city>
					<country>Canada</country>
				</postal>
				<email>gary.court@gmail.com</email>
			</address>
		</author>

		<date year="2011" />
		<workgroup>Internet Engineering Task Force</workgroup>
		<keyword>JSON</keyword>
		<keyword>Schema</keyword>
		<keyword>JavaScript</keyword>
		<keyword>Object</keyword>
		<keyword>Notation</keyword>
		<keyword>Hyper Schema</keyword>
		<keyword>Hypermedia</keyword>

		<abstract>
			<t>
				JSON (JavaScript Object Notation) Schema defines the media type "application/schema+json",
				a JSON based format for defining
				the structure of JSON data. JSON Schema provides a contract for what JSON
				data is required for a given application and how to interact with it. JSON
				Schema is intended to define validation, documentation, hyperlink
				navigation, and interaction control of JSON data.
			</t>
		</abstract>
	</front>

	<middle>
		<section title="Introduction">
			<t>
				JSON (JavaScript Object Notation) Schema is a JSON media type for defining
				the structure of JSON data. JSON Schema provides a contract for what JSON
				data is required for a given application and how to interact with it. JSON
				Schema is intended to define validation, documentation, hyperlink
				navigation, and interaction control of JSON data.
			</t>
		</section>

		<section title="Conventions">
			<t>
				<!-- The text in this section has been copied from the official boilerplate,
				and should not be modified.-->

				The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD",
				"SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be
				interpreted as described in <xref target="RFC2119">RFC 2119</xref>.
			</t>
		</section>

		<!-- ********************************************* -->

		<section title="Overview">
			<t>
				JSON Schema defines the media type "application/schema+json" for
				describing the structure of other
				JSON documents. JSON Schema is JSON-based and includes facilities
				for describing the structure of JSON documents in terms of
				allowable values, descriptions, and interpreting relations with other resources.
			</t>
			<t>
				JSON Schema format is organized into several separate definitions. The first
				definition is the core schema specification. This definition is primary
				concerned with describing a JSON structure and specifying valid elements
				in the structure. The second definition is the Hyper Schema specification
				which is intended define elements in a structure that can be interpreted as
				hyperlinks.
				Hyper Schema builds on JSON Schema to describe the hyperlink structure of
				other JSON documents and elements of interaction. This allows user agents to be able to successfully navigate
				JSON documents based on their schemas.
			</t>
			<t>
				Cumulatively JSON Schema acts as a meta-document that can be used to define the required type and constraints on
				property values, as well as define the meaning of the property values
				for the purpose of describing a resource and determining hyperlinks
				within the representation.
			</t>
			<figure>
				<preamble>An example JSON Schema that describes products might look like:</preamble>
				<artwork>
<![CDATA[
{
	"title": "Product",
	"properties": {
		"id": {
			"type": "number",
			"description": "Product identifier",
			"required": true
		},
		"name": {
			"description": "Name of the product",
			"type": "string",
			"required": true
		},
		"price": {
			"required": true,
			"type": "number",
			"minimum": 0,
			"required": true
		},
		"tags": {
			"type": "array",
			"items": {
				"type": "string"
			}
		}
	},
	"links": [{
		"rel": "full",
		"href": "{id}"
	}, {
		"rel": "comments",
		"href": "comments/?id={id}"
	}]
}
]]>
				</artwork>
				<postamble>
					This schema defines the properties of the instance JSON documents,
					the required properties (id, name, and price), as well as an optional
					property (tags). This also defines the link relations of the instance
					JSON documents.
				</postamble>
			</figure>

			<section title="Terminology">
				<t>
					For this specification, <spanx style="strong">schema</spanx> will be used to denote a JSON Schema
					definition, and an <spanx style="strong">instance</spanx> refers to a JSON value that the schema
					will be describing and validating.
				</t>
			</section>

			<section title="Design Considerations">
				<t>
					The JSON Schema media type does not attempt to dictate the structure of JSON
					representations that contain data, but rather provides a separate format
					for flexibly communicating how a JSON representation should be
					interpreted and validated, such that user agents can properly understand
					acceptable structures and extrapolate hyperlink information
					with the JSON document. It is acknowledged that JSON documents come
					in a variety of structures, and JSON is unique in that the structure
					of stored data structures often prescribes a non-ambiguous definite
					JSON representation. Attempting to force a specific structure is generally
					not viable, and therefore JSON Schema allows for a great flexibility
					in the structure of the JSON data that it describes.
				</t>
				<t>
					This specification is protocol agnostic.
					The underlying protocol (such as HTTP) should sufficiently define the
					semantics of the client-server interface, the retrieval of resource
					representations linked to by JSON representations, and modification of
					those resources. The goal of this
					format is to sufficiently describe JSON structures such that one can
					utilize existing information available in existing JSON
					representations from a large variety of services that leverage a representational state transfer
					architecture using existing protocols.
				</t>
			</section>
		</section>

		<section title="Schema/Instance Association">
			<t>
				JSON Schema instances are correlated to their schema by the "describedby"
				relation, where the schema is defined to be the target of the relation.
				Instance representations may be of the "application/json" media type or
				any other subtype. Consequently, dictating how an instance
				representation should specify the relation to the schema is beyond the normative scope
				of this document (since this document specifically defines the JSON
				Schema media type, and no other), but it is recommended that instances
				specify their schema so that user agents can interpret the instance
				representation and messages may retain the self-descriptive
				characteristic, avoiding the need for out-of-band information about
				instance data. Two approaches are recommended for declaring the
				relation to the schema that describes the meaning of a JSON instance's (or collection
				of instances) structure. A MIME type parameter named
				"profile" or a relation of "describedby" (which could be defined by a Link header) may be used:

				<figure>
					<artwork>
<![CDATA[
Content-Type: application/my-media-type+json;
              profile=http://json.com/my-hyper-schema
]]>
					</artwork>
				</figure>

				or if the content is being transferred by a protocol (such as HTTP) that
				provides headers, a Link header can be used:

				<figure>
					<artwork>
<![CDATA[
Link: <http://json.com/my-hyper-schema>; rel="describedby"
]]>
					</artwork>
				</figure>

				Instances MAY specify multiple schemas, to indicate all the schemas that
				are applicable to the data, and the data SHOULD be valid by all the schemas.
				The instance data MAY have multiple schemas
				that it is defined by (the instance data SHOULD be valid for those schemas).
				Or if the document is a collection of instances, the collection MAY contain
				instances from different schemas. When collections contain heterogeneous
				instances, the "pathStart" attribute MAY be specified in the
				schema to disambiguate which schema should be applied for each item in the
				collection. However, ultimately, the mechanism for referencing a schema is up to the
				media type of the instance documents (if they choose to specify that schemas
				can be referenced).
			</t>

			<section title="Self-Descriptive Schema">
				<t>
					JSON Schemas can themselves be described using JSON Schemas.
					A self-describing JSON Schema for the core JSON Schema can
					be found at <eref target="http://json-schema.org/schema">http://json-schema.org/schema</eref> for the latest version or
					<eref target="http://json-schema.org/draft-03/schema">http://json-schema.org/draft-03/schema</eref> for the draft-03 version. The hyper schema
					self-description can be found at <eref target="http://json-schema.org/hyper-schema">http://json-schema.org/hyper-schema</eref>
					or <eref target="http://json-schema.org/draft-03/hyper-schema">http://json-schema.org/draft-03/hyper-schema</eref>. All schemas
					used within a protocol with media type definitions
					SHOULD include a MIME parameter that refers to the self-descriptive
					hyper schema or another schema that extends this hyper schema:

					<figure>
						<artwork>
<![CDATA[
Content-Type: application/json;
              profile=http://json-schema.org/draft-03/hyper-schema
]]>
						</artwork>
					</figure>
				</t>
			</section>
		</section>

		<section title="Core Schema Definition">
			<t>
				A JSON Schema is a JSON Object that defines various attributes
				(including usage and valid values) of a JSON value. JSON
				Schema has recursive capabilities; there are a number of elements
				in the structure that allow for nested JSON Schemas.
			</t>

			<figure>
				<preamble>An example JSON Schema definition could look like:</preamble>
				<artwork>
<![CDATA[
{
	"description": "A person",
	"type": "object",

	"properties": {
		"name": {
			"type": "string"
		},
		"age": {
			"type": "integer",
			"maximum": 125
		}
	}
}
]]>
				</artwork>
			</figure>

			<t>
				A JSON Schema object may have any of the following properties, called schema
				attributes (all attributes are optional):
			</t>

			<section title="type">
				<t>
					This attribute defines what the primitive type or the schema of the instance MUST be in order to validate.
					This attribute can take one of two forms:

					<list style="hanging">
						<t hangText="Simple Types">
							A string indicating a primitive or simple type. The following are acceptable string values:

							<list style="hanging">
								<t hangText="string">Value MUST be a string.</t>
								<t hangText="number">Value MUST be a number, floating point numbers are allowed. </t>
								<t hangText="integer">Value MUST be an integer, no floating point numbers are allowed. This is a subset of the number type.</t>
								<t hangText="boolean">Value MUST be a boolean. </t>
								<t hangText="object">Value MUST be an object.</t>
								<t hangText="array">Value MUST be an array.</t>
								<t hangText="null">Value MUST be null. Note this is mainly for purpose of being able use union types to define nullability. If this type is not included in a union, null values are not allowed (the primitives listed above do not allow nulls on their own).</t>
								<t hangText="any">Value MAY be of any type including null.</t>
							</list>

							If the property is not defined or is not in this list, then any type of value is acceptable.
							Other type values MAY be used for custom purposes, but minimal validators of the specification
							implementation can allow any instance value on unknown type values.
						</t>

						<t hangText="Union Types">
							An array of two or more simple type definitions. Each item in the array MUST be a simple type definition or a schema.
							The instance value is valid if it is of the same type as one of the simple type definitions, or valid by one of the schemas, in the array.
						</t>
					</list>
				</t>

				<figure>
					<preamble>For example, a schema that defines if an instance can be a string or a number would be:</preamble>
					<artwork>
<![CDATA[
{
	"type": ["string", "number"]
}
]]></artwork>
				</figure>
			</section>

			<section title="properties" anchor="properties">
				<t>This attribute is an object with property definitions that define the valid values of instance object property values. When the instance value is an object, the property values of the instance object MUST conform to the property definitions in this object. In this object, each property definition's value MUST be a schema, and the property's name MUST be the name of the instance property that it defines. The instance property value MUST be valid according to the schema from the property definition. Properties are considered unordered, the order of the instance properties MAY be in any order.</t>
			</section>

			<section title="patternProperties">
				<t>This attribute is an object that defines the schema for a set of property names of an object instance. The name of each property of this attribute's object is a regular expression pattern in the ECMA 262/Perl 5 format, while the value is a schema. If the pattern matches the name of a property on the instance object, the value of the instance's property MUST be valid against the pattern name's schema value.</t>
			</section>

			<section title="additionalProperties" anchor="additionalProperties">
				<t>This attribute defines a schema for all properties that are not explicitly defined in an object type definition. If specified, the value MUST be a schema or a boolean. If false is provided, no additional properties are allowed beyond the properties defined in the schema. The default value is an empty schema which allows any value for additional properties.</t>
			</section>

			<section title="items">
				<t>This attribute defines the allowed items in an instance array, and MUST be a schema or an array of schemas. The default value is an empty schema which allows any value for items in the instance array.</t>
				<t>When this attribute value is a schema and the instance value is an array, then all the items in the array MUST be valid according to the schema.</t>
				<t>When this attribute value is an array of schemas and the instance value is an array, each position in the instance array MUST conform to the schema in the corresponding position for this array. This called tuple typing. When tuple typing is used, additional items are allowed, disallowed, or constrained by the <xref target="additionalItems">"additionalItems"</xref> attribute using the same rules as <xref target="additionalProperties">"additionalProperties"</xref> for objects.</t>
			</section>

			<section title="additionalItems" anchor="additionalItems">
				<t>This provides a definition for additional items in an array instance when tuple definitions of the items is provided. This can be false to indicate additional items in the array are not allowed, or it can be a schema that defines the schema of the additional items.</t>
			</section>

			<section title="required">
				<t>This attribute indicates if the instance must have a value, and not be undefined. This is false by default, making the instance optional.</t>
			</section>

			<section title="dependencies">
				<t>This attribute is an object that defines the requirements of a property on an instance object. If an object instance has a property with the same name as a property in this attribute's object, then the instance must be valid against the attribute's property value (hereafter referred to as the "dependency value").</t>
				<t>
					The dependency value can take one of two forms:

					<list style="hanging">
						<t hangText="Simple Dependency">
							If the dependency value is a string, then the instance object MUST have a property with the same name as the dependency value.
							If the dependency value is an array of strings, then the instance object MUST have a property with the same name as each string in the dependency value's array.
						</t>
						<t hangText="Schema Dependency">
							If the dependency value is a schema, then the instance object MUST be valid against the schema.
						</t>
					</list>
				</t>
			</section>

			<section title="minimum">
				<t>This attribute defines the minimum value of the instance property when the type of the instance value is a number.</t>
			</section>

			<section title="maximum">
				<t>This attribute defines the maximum value of the instance property when the type of the instance value is a number.</t>
			</section>

			<section title="exclusiveMinimum">
				<t>This attribute indicates if the value of the instance (if the instance is a number) can not equal the number defined by the "minimum" attribute. This is false by default, meaning the instance value can be greater then or equal to the minimum value.</t>
			</section>

			<section title="exclusiveMaximum">
				<t>This attribute indicates if the value of the instance (if the instance is a number) can not equal the number defined by the "maximum" attribute. This is false by default, meaning the instance value can be less then or equal to the maximum value.</t>
			</section>

			<section title="minItems">
				<t>This attribute defines the minimum number of values in an array when the array is the instance value.</t>
			</section>

			<section title="maxItems">
				<t>This attribute defines the maximum number of values in an array when the array is the instance value.</t>
			</section>

			<section title="uniqueItems" anchor="uniqueItems">
				<t>This attribute indicates that all items in an array instance MUST be unique (contains no two identical values).</t>
				<t>
					Two instance are consider equal if they are both of the same type and:

					<list>
						<t>are null; or</t>
						<t>are booleans/numbers/strings and have the same value; or</t>
						<t>are arrays, contains the same number of items, and each item in the array is equal to the corresponding item in the other array; or</t>
						<t>are objects, contains the same property names, and each property in the object is equal to the corresponding property in the other object.</t>
					</list>
				</t>
			</section>

			<section title="pattern">
				<t>When the instance value is a string, this provides a regular expression that a string instance MUST match in order to be valid. Regular expressions SHOULD follow the regular expression specification from ECMA 262/Perl 5</t>
			</section>

			<section title="minLength">
				<t>When the instance value is a string, this defines the minimum length of the string.</t>
			</section>

			<section title="maxLength">
				<t>When the instance value is a string, this defines the maximum length of the string.</t>
			</section>

			<section title="enum">
				<t>This provides an enumeration of all possible values that are valid for the instance property. This MUST be an array, and each item in the array represents a possible value for the instance value. If this attribute is defined, the instance value MUST be one of the values in the array in order for the schema to be valid. Comparison of enum values uses the same algorithm as defined in <xref target="uniqueItems">"uniqueItems"</xref>.</t>
			</section>

			<section title="default">
				<t>This attribute defines the default value of the instance when the instance is undefined.</t>
			</section>

			<section title="title">
				<t>This attribute is a string that provides a short description of the instance property.</t>
			</section>

			<section title="description">
				<t>This attribute is a string that provides a full description of the of purpose the instance property.</t>
			</section>

			<section title="format">
				<t>This property defines the type of data, content type, or microformat to be expected in the instance property values. A format attribute MAY be one of the values listed below, and if so, SHOULD adhere to the semantics describing for the format. A format SHOULD only be used to give meaning to primitive types (string, integer, number, or boolean). Validators MAY (but are not required to) validate that the instance values conform to a format.</t>

				<t>
					The following formats are predefined:

					<list style="hanging">
						<t hangText="date-time">This SHOULD be a date in ISO 8601 format of YYYY-MM-DDThh:mm:ssZ in UTC time. This is the recommended form of date/timestamp.</t>
						<t hangText="date">This SHOULD be a date in the format of YYYY-MM-DD. It is recommended that you use the "date-time" format instead of "date" unless you need to transfer only the date part.</t>
						<t hangText="time">This SHOULD be a time in the format of hh:mm:ss. It is recommended that you use the "date-time" format instead of "time" unless you need to transfer only the time part.</t>
						<t hangText="utc-millisec">This SHOULD be the difference, measured in milliseconds, between the specified time and midnight, 00:00 of January 1, 1970 UTC. The value SHOULD be a number (integer or float).</t>
						<t hangText="regex">A regular expression, following the regular expression specification from ECMA 262/Perl 5.</t>
						<t hangText="color">This is a CSS color (like "#FF0000" or "red"), based on <xref target="W3C.CR-CSS21-20070719">CSS 2.1</xref>.</t>
						<t hangText="style">This is a CSS style definition (like "color: red; background-color:#FFF"), based on <xref target="W3C.CR-CSS21-20070719">CSS 2.1</xref>.</t>
						<t hangText="phone">This SHOULD be a phone number (format MAY follow E.123).</t>
						<t hangText="uri">This value SHOULD be a URI.</t>
						<t hangText="email">This SHOULD be an email address.</t>
						<t hangText="ip-address">This SHOULD be an ip version 4 address.</t>
						<t hangText="ipv6">This SHOULD be an ip version 6 address.</t>
						<t hangText="host-name">This SHOULD be a host-name.</t>
					</list>
				</t>

				<t>Additional custom formats MAY be created. These custom formats MAY be expressed as an URI, and this URI MAY reference a schema of that format.</t>
			</section>

			<section title="divisibleBy">
				<t>This attribute defines what value the number instance must be divisible by with no remainder (the result of the division must be an integer.) The value of this attribute SHOULD NOT be 0.</t>
			</section>

			<section title="disallow">
				<t>This attribute takes the same values as the "type" attribute, however if the instance matches the type or if this value is an array and the instance matches any type or schema in the array, then this instance is not valid.</t>
			</section>

			<section title="extends">
				<t>The value of this property MUST be another schema which will provide a base schema which the current schema will inherit from. The inheritance rules are such that any instance that is valid according to the current schema MUST be valid according to the referenced schema. This MAY also be an array, in which case, the instance MUST be valid for all the schemas in the array. A schema that extends another schema MAY define additional attributes, constrain existing attributes, or add other constraints.</t>
				<t>
					Conceptually, the behavior of extends can be seen as validating an
					instance against all constraints in the extending schema as well as
					the extended schema(s). More optimized implementations that merge
					schemas are possible, but are not required. Some examples of using "extends":

					<figure>
						<artwork>
<![CDATA[
{
	"description": "An adult",
	"properties": {
		"age": {
			"minimum": 21
		}
	},
	"extends": {"$ref": "person"}
}
]]>
						</artwork>
					</figure>

					<figure>
						<artwork>
<![CDATA[
{
	"description": "Extended schema",
	"properties": {
		"deprecated": {
			"type": "boolean"
		}
	},
	"extends": {"$ref": "http://json-schema.org/draft-03/schema"}
}
]]>
						</artwork>
					</figure>
				</t>
			</section>

			<section title="id">
				<t>
					This attribute defines the current URI of this schema (this attribute is
					effectively a "self" link). This URI MAY be relative or absolute. If
					the URI is relative it is resolved against the current URI of the parent
					schema it is contained in. If this schema is not contained in any
					parent schema, the current URI of the parent schema is held to be the
					URI under which this schema was addressed. If id is missing, the current URI of a schema is
					defined to be that of the parent schema. The current URI of the schema
					is also used to construct relative references such as for $ref.
				</t>
			</section>

			<section title="$ref">
				<t>
					This attribute defines a URI of a schema that contains the full representation of this schema.
					When a validator encounters this attribute, it SHOULD replace the current schema with the schema referenced by the value's URI (if known and available) and re-validate the instance.
					This URI MAY be relative or absolute, and relative URIs SHOULD be resolved against the URI of the current schema.
				</t>
			</section>

			<section title="$schema">
				<t>
					This attribute defines a URI of a JSON Schema that is the schema of the current schema.
					When this attribute is defined, a validator SHOULD use the schema referenced by the value's URI (if known and available) when resolving <xref target="hyper-schema">Hyper Schema</xref><xref target="links">links</xref>.
				</t>

				<t>
					A validator MAY use this attribute's value to determine which version of JSON Schema the current schema is written in, and provide the appropriate validation features and behavior.
					Therefore, it is RECOMMENDED that all schema authors include this attribute in their schemas to prevent conflicts with future JSON Schema specification changes.
				</t>
			</section>
		</section>

		<section title="Hyper Schema" anchor="hyper-schema">
			<t>
				The following attributes are specified in addition to those
				attributes that already provided by the core schema with the specific
				purpose of informing user agents of relations between resources based
				on JSON data. Just as with JSON
				schema attributes, all the attributes in hyper schemas are optional.
				Therefore, an empty object is a valid (non-informative) schema, and
				essentially describes plain JSON (no constraints on the structures).
				Addition of attributes provides additive information for user agents.
			</t>

			<section title="links" anchor="links">
				<t>
					The value of the links property MUST be an array, where each item
					in the array is a link description object which describes the link
					relations of the instances.
				</t>

				<section title="Link Description Object">
					<t>
						A link description object is used to describe link relations. In
						the context of a schema, it defines the link relations of the
						instances of the schema, and can be parameterized by the instance
						values. The link description format can be used on its own in
						regular (non-schema documents), and use of this format can
						be declared by referencing the normative link description
						schema as the the schema for the data structure that uses the
						links. The URI of the normative link description schema is:
						<eref target="http://json-schema.org/links">http://json-schema.org/links</eref> (latest version) or
						<eref target="http://json-schema.org/draft-03/links">http://json-schema.org/draft-03/links</eref> (draft-03 version).
					</t>

					<section title="href">
						<t>
							The value of the "href" link description property
							indicates the target URI of the related resource. The value
							of the instance property SHOULD be resolved as a URI-Reference per <xref target="RFC3986">RFC 3986</xref>
							and MAY be a relative URI. The base URI to be used for relative resolution
							SHOULD be the URI used to retrieve the instance object (not the schema)
							when used within a schema. Also, when links are used within a schema, the URI
							SHOULD be parametrized by the property values of the instance
							object, if property values exist for the corresponding variables
							in the template (otherwise they MAY be provided from alternate sources, like user input).
						</t>

						<t>
							Instance property values SHOULD be substituted into the URIs where
							matching braces ('{', '}') are found surrounding zero or more characters,
							creating an expanded URI. Instance property value substitutions are resolved
							by using the text between the braces to denote the property name
							from the instance to get the value to substitute.

							<figure>
								<preamble>For example, if an href value is defined:</preamble>
								<artwork>
<![CDATA[
http://somesite.com/{id}
]]>
								</artwork>
								<postamble>Then it would be resolved by replace the value of the "id" property value from the instance object.</postamble>
							</figure>

							<figure>
								<preamble>If the value of the "id" property was "45", the expanded URI would be:</preamble>
								<artwork>
<![CDATA[
http://somesite.com/45
]]>
								</artwork>
							</figure>

							If matching braces are found with the string "@" (no quotes) between the braces, then the
							actual instance value SHOULD be used to replace the braces, rather than a property value.
							This should only be used in situations where the instance is a scalar (string,
							boolean, or number), and not for objects or arrays.
						</t>
					</section>

					<section title="rel">
						<t>
							The value of the "rel" property indicates the name of the
							relation to the target resource. The relation to the target SHOULD be interpreted as specifically from the instance object that the schema (or sub-schema) applies to, not just the top level resource that contains the object within its hierarchy. If a resource JSON representation contains a sub object with a property interpreted as a link, that sub-object holds the relation with the target. A relation to target from the top level resource MUST be indicated with the schema describing the top level JSON representation.
						</t>

						<t>
							Relationship definitions SHOULD NOT be media type dependent, and users are encouraged to utilize existing accepted relation definitions, including those in existing relation registries (see <xref target="RFC4287">RFC 4287</xref>). However, we define these relations here for clarity of normative interpretation within the context of JSON hyper schema defined relations:

							<list style="hanging">
								<t hangText="self">
									If the relation value is "self", when this property is encountered in
									the instance object, the object represents a resource and the instance object is
									treated as a full representation of the target resource identified by
									the specified URI.
								</t>

								<t hangText="full">
									This indicates that the target of the link is the full representation for the instance object. The object that contains this link possibly may not be the full representation.
								</t>

								<t hangText="describedby">
									This indicates the target of the link is the schema for the instance object. This MAY be used to specifically denote the schemas of objects within a JSON object hierarchy, facilitating polymorphic type data structures.
								</t>

								<t hangText="root">
									This relation indicates that the target of the link
									SHOULD be treated as the root or the body of the representation for the
									purposes of user agent interaction or fragment resolution. All other
									properties of the instance objects can be regarded as meta-data
									descriptions for the data.
								</t>
							</list>
						</t>

						<t>
							The following relations are applicable for schemas (the schema as the "from" resource in the relation):

							<list style="hanging">
								<t hangText="instances">This indicates the target resource that represents collection of instances of a schema.</t>
								<t hangText="create">This indicates a target to use for creating new instances of a schema. This link definition SHOULD be a submission link with a non-safe method (like POST).</t>
							</list>
						</t>

						<t>
							<figure>
								<preamble>For example, if a schema is defined:</preamble>
								<artwork>
<![CDATA[
{
	"links": [{
		"rel": "self",
		"href": "{id}"
	}, {
		"rel": "up",
		"href": "{upId}"
	}, {
		"rel": "children",
		"href": "?upId={id}"
	}]
}
]]>
								</artwork>
							</figure>

							<figure>
								<preamble>And if a collection of instance resource's JSON representation was retrieved:</preamble>
								<artwork>
<![CDATA[
GET /Resource/

[{
	"id": "thing",
	"upId": "parent"
}, {
	"id": "thing2",
	"upId": "parent"
}]
]]>
								</artwork>
							</figure>

							This would indicate that for the first item in the collection, its own
							(self) URI would resolve to "/Resource/thing" and the first item's "up"
							relation SHOULD be resolved to the resource at "/Resource/parent".
							The "children" collection would be located at "/Resource/?upId=thing".
						</t>
					</section>

					<section title="targetSchema">
						<t>This property value is a schema that defines the expected structure of the JSON representation of the target of the link.</t>
					</section>

					<section title="Submission Link Properties">
						<t>
							The following properties also apply to link definition objects, and
							provide functionality analogous to HTML forms, in providing a
							means for submitting extra (often user supplied) information to send to a server.
						</t>

						<section title="method">
							<t>
								This attribute defines which method can be used to access the target resource.
								In an HTTP environment, this would be "GET" or "POST" (other HTTP methods
								such as "PUT" and "DELETE" have semantics that are clearly implied by
								accessed resources, and do not need to be defined here).
								This defaults to "GET".
							</t>
						</section>

						<section title="enctype">
							<t>
								If present, this property indicates a query media type format that the server
								supports for querying or posting to the collection of instances at the target
								resource. The query can be
								suffixed to the target URI to query the collection with
								property-based constraints on the resources that SHOULD be returned from
								the server or used to post data to the resource (depending on the method).

								<figure>
									<preamble>For example, with the following schema:</preamble>
									<artwork>
<![CDATA[
{
	"links": [{
		"enctype": "application/x-www-form-urlencoded",
		"method": "GET",
		"href": "/Product/",
		"properties": {
			"name": {
				"description": "name of the product"
			}
		}
	}]
}
]]>
									</artwork>
									<postamble>This indicates that the client can query the server for instances that have a specific name.</postamble>
								</figure>

								<figure>
									<preamble>For example:</preamble>
									<artwork>
<![CDATA[
/Product/?name=Slinky
]]>
									</artwork>
								</figure>

								If no enctype or method is specified, only the single URI specified by
								the href property is defined. If the method is POST, "application/json" is
								the default media type.
							</t>
						</section>

						<section title="schema">
							<t>
								This attribute contains a schema which defines the acceptable structure of the submitted
								request (for a GET request, this schema would define the properties for the query string
								and for a POST request, this would define the body).
							</t>
						</section>
					</section>
				</section>
			</section>

			<section title="fragmentResolution">
				<t>
					This property indicates the fragment resolution protocol to use for
					resolving fragment identifiers in URIs within the instance
					representations. This applies to the instance object URIs and all
					children of the instance object's URIs. The default fragment resolution
					protocol is "slash-delimited", which is defined below. Other fragment
					resolution protocols MAY be used, but are not defined in this document.
				</t>

				<t>
					The fragment identifier is based on <xref target="RFC2396">RFC 2396, Sec 5</xref>, and defines the
					mechanism for resolving references to entities within a document.
				</t>

				<section title="slash-delimited fragment resolution">
					<t>
						With the slash-delimited fragment resolution protocol, the fragment
						identifier is interpreted as a series of property reference tokens that start with and
						are delimited by the "/" character (\x2F). Each property reference token
						is a series of unreserved or escaped URI characters. Each property
						reference token SHOULD be interpreted, starting from the beginning of
						the fragment identifier, as a path reference in the target JSON
						structure. The final target value of the fragment can be determined by
						starting with the root of the JSON structure from the representation of
						the resource identified by the pre-fragment URI. If the target is a JSON
						object, then the new target is the value of the property with the name
						identified by the next property reference token in the fragment. If the
						target is a JSON array, then the target is determined by finding the
						item in array the array with the index defined by the next property
						reference token (which MUST be a number). The target is successively
						updated for each property reference token, until the entire fragment has
						been traversed.
					</t>

					<t>
						Property names SHOULD be URI-encoded. In particular, any "/" in a
						property name MUST be encoded to avoid being interpreted as a property
						delimiter.
					</t>

					<t>
						<figure>
							<preamble>For example, for the following JSON representation:</preamble>
							<artwork>
<![CDATA[
{
	"foo": {
		"anArray": [{
			"prop": 44
		}],
		"another prop": {
			"baz": "A string"
		}
	}
}
]]>
							</artwork>
						</figure>

						<figure>
							<preamble>The following fragment identifiers would be resolved:</preamble>
							<artwork>
<![CDATA[
fragment identifier      resolution
-------------------      ----------
#                        self, the root of the resource itself
#/foo                    the object referred to by the foo property
#/foo/another%20prop     the object referred to by the "another prop"
                         property of the object referred to by the
                         "foo" property
#/foo/another%20prop/baz the string referred to by the value of "baz"
                         property of the "another prop" property of
                         the object referred to by the "foo" property
#/foo/anArray/0          the first object in the "anArray" array
]]>
							</artwork>
						</figure>
					</t>
				</section>

				<section title="dot-delimited fragment resolution">
					<t>
						The dot-delimited fragment resolution protocol is the same as
						slash-delimited fragment resolution protocol except that the "." character
						(\x2E) is used as the delimiter between property names (instead of "/") and
						the path does not need to start with a ".". For example, #.foo and #foo are a valid fragment
						identifiers for referencing the value of the foo propery.
					</t>
				</section>
			</section>

			<section title="readonly">
				<t>This attribute indicates that the instance property SHOULD NOT be changed. Attempts by a user agent to modify the value of this property are expected to be rejected by a server.</t>
			</section>

			<section title="contentEncoding">
				<t>If the instance property value is a string, this attribute defines that the string SHOULD be interpreted as binary data and decoded using the encoding named by this schema property. <xref target="RFC2045">RFC 2045, Sec 6.1</xref> lists the possible values for this property.</t>
			</section>

			<section title="pathStart">
				<t>
					This attribute is a URI that defines what the instance's URI MUST start with in order to validate.
					The value of the "pathStart" attribute MUST be resolved as per <xref target="RFC3986">RFC 3986, Sec 5</xref>,
					and is relative to the instance's URI.
				</t>

				<t>
					When multiple schemas have been referenced for an instance, the user agent
					can determine if this schema is applicable for a particular instance by
					determining if the URI of the instance begins with the the value of the "pathStart"
					attribute. If the URI of the instance does not start with this URI,
					or if another schema specifies a starting URI that is longer and also matches the
					instance, this schema SHOULD NOT be applied to the instance. Any schema
					that does not have a pathStart attribute SHOULD be considered applicable
					to all the instances for which it is referenced.
				</t>
			</section>

			<section title="mediaType">
				<t>This attribute defines the media type of the instance representations that this schema is defining.</t>
			</section>
		</section>

		<section title="Security Considerations">
			<t>
				This specification is a sub-type of the JSON format, and
				consequently the security considerations are generally the same as <xref target="RFC4627">RFC 4627</xref>.
				However, an additional issue is that when link relation of "self"
				is used to denote a full representation of an object, the user agent
				SHOULD NOT consider the representation to be the authoritative representation
				of the resource denoted by the target URI if the target URI is not
				equivalent to or a sub-path of the the URI used to request the resource
				representation which contains the target URI with the "self" link.

				<figure>
					<preamble>For example, if a hyper schema was defined:</preamble>
					<artwork>
<![CDATA[
{
	"links": [{
		"rel": "self",
		"href": "{id}"
	}]
}
]]>
					</artwork>
				</figure>

				<figure>
					<preamble>And a resource was requested from somesite.com:</preamble>
					<artwork>
<![CDATA[
GET /foo/
]]>
					</artwork>
				</figure>

				<figure>
					<preamble>With a response of:</preamble>
					<artwork>
<![CDATA[
Content-Type: application/json; profile=/schema-for-this-data

[{
	"id": "bar",
	"name": "This representation can be safely treated \
		as authoritative "
}, {
	"id": "/baz",
	"name": "This representation should not be treated as \
		authoritative the user agent should make request the resource\
		from '/baz' to ensure it has the authoritative representation"
}, {
	"id": "http://othersite.com/something",
	"name": "This representation\
		should also not be treated as authoritative and the target\
		resource representation should be retrieved for the\
		authoritative representation"
}]
]]>
					</artwork>
				</figure>
			</t>
		</section>

		<section title="IANA Considerations">
			<t>The proposed MIME media type for JSON Schema is "application/schema+json".</t>
			<t>Type name: application</t>
			<t>Subtype name: schema+json</t>
			<t>Required parameters: profile</t>
			<t>
				The value of the profile parameter SHOULD be a URI (relative or absolute) that
				refers to the schema used to define the structure of this structure (the
				meta-schema). Normally the value would be http://json-schema.org/draft-03/hyper-schema,
				but it is allowable to use other schemas that extend the hyper schema's meta-
				schema.
			</t>
			<t>Optional parameters: pretty</t>
			<t>The value of the pretty parameter MAY be true or false to indicate if additional whitespace has been included to make the JSON representation easier to read.</t>

			<section title="Registry of Link Relations">
				<t>
					This registry is maintained by IANA per <xref target="RFC4287">RFC 4287</xref> and this specification adds
					four values: "full", "create", "instances", "root".  New
					assignments are subject to IESG Approval, as outlined in <xref target="RFC5226">RFC 5226</xref>.
					Requests should be made by email to IANA, which will then forward the
					request to the IESG, requesting approval.
				</t>
			</section>
		</section>
	</middle>

	<back>
		<!-- References Section -->
		<references title="Normative References">
			&rfc2045;
			&rfc2119;
			&rfc2396;
			&rfc3339;
			&rfc3986;
			&rfc4287;
		</references>
		<references title="Informative References">
			&rfc2616;
			&rfc4627;
			&rfc5226;
			&iddiscovery;
			&uritemplate;
			&linkheader;
			&html401;
			&css21;
		</references>

		<section title="Change Log">
			<t>
				<list style="hanging">
					<t hangText="draft-03">
						<list style="symbols">
							<t>Added example and verbiage to "extends" attribute.</t>
							<t>Defined slash-delimited to use a leading slash.</t>
							<t>Made "root" a relation instead of an attribute.</t>
							<t>Removed address values, and MIME media type from format to reduce confusion (mediaType already exists, so it can be used for MIME types).</t>
							<t>Added more explanation of nullability.</t>
							<t>Removed "alternate" attribute.</t>
							<t>Upper cased many normative usages of must, may, and should.</t>
							<t>Replaced the link submission "properties" attribute to "schema" attribute.</t>
							<t>Replaced "optional" attribute with "required" attribute.</t>
							<t>Replaced "maximumCanEqual" attribute with "exclusiveMaximum" attribute.</t>
							<t>Replaced "minimumCanEqual" attribute with "exclusiveMinimum" attribute.</t>
							<t>Replaced "requires" attribute with "dependencies" attribute.</t>
							<t>Moved "contentEncoding" attribute to hyper schema.</t>
							<t>Added "additionalItems" attribute.</t>
							<t>Added "id" attribute.</t>
							<t>Switched self-referencing variable substitution from "-this" to "@" to align with reserved characters in URI template.</t>
							<t>Added "patternProperties" attribute.</t>
							<t>Schema URIs are now namespace versioned.</t>
							<t>Added "$ref" and "$schema" attributes.</t>
						</list>
					</t>

					<t hangText="draft-02">
						<list style="symbols">
							<t>Replaced "maxDecimal" attribute with "divisibleBy" attribute.</t>
							<t>Added slash-delimited fragment resolution protocol and made it the default.</t>
							<t>Added language about using links outside of schemas by referencing its normative URI.</t>
							<t>Added "uniqueItems" attribute.</t>
							<t>Added "targetSchema" attribute to link description object.</t>
						</list>
					</t>

					<t hangText="draft-01">
						<list style="symbols">
							<t>Fixed category and updates from template.</t>
						</list>
					</t>

					<t hangText="draft-00">
						<list style="symbols">
							<t>Initial draft.</t>
						</list>
					</t>
				</list>
			</t>
		</section>

		<section title="Open Issues">
			<t>
				<list>
					<t>Should we give a preference to MIME headers over Link headers (or only use one)?</t>
					<t>Should "root" be a MIME parameter?</t>
					<t>Should "format" be renamed to "mediaType" or "contentType" to reflect the usage MIME media types that are allowed?</t>
					<t>How should dates be handled?</t>
				</list>
			</t>
		</section>
	</back>
</rfc>
